ELP 30x series

Graphic information LED panels for large junctions – the ELP 30x series

Graphic Information LED panels type ELP 302

Graphic information LED panels of the ELP 302 type are characterized by a large number of displayable signs. They are suitable for big transition junctions. They are designed in such a way that it is easy for a passenger to  obtain information regarding departures, platform numbers and delays.

Pic. no.1: ELP 302.

Pic. no.1: ELP 302.

Basic parameters of the ELP 302.04 panels
Installation Welded stainless frame of the RAL 7010 color or other colors if requested
LED color red (other colors on demand)
Communication interface Ethernet, Wi-Fi 2,4 GHz, GSM/GPRS/UMTS, RS 485
Panel measurements (w × h × d) 1130 × 575 × 372 mm
Active surface 50 × 160 points
LED spacing 6,2 mm (other on demand)
Mechanical rendering Inclinable front (bonnet) including LED panels supported by pistons
Working temperature from -30 °C to +45 °C
Relative humidity 10 % to 95 % at 40°C, non-condensation
Weight 50 kg
Illumination control YES – photosensor
Power supply 230 VAC / 50 Hz
Maximum consumption 400 W.
Actual consumption 70 W

Properties of the ELP 302 panels

  • High-performance LED board control unit module capable of processing picture at the frequency of 300 Hz.
  • Control industrial PC with user HW. It can contain station/stop schedules for autonomous operation (off-line mode).
  • MP3 player equipped with an acoustic switchboard (15 W) and with the possibility of sending dispatching announcements right into stop/station speakers.
  • Integrated command receiver for the vision impaired which is capable of reading out texts including page turning.
  • LED diode illumination regulation controlled by a sensor; receiving accurate time.
  • Wide-angle camera for sending pictures and videos of the number and behavior of the passengers at stops.
  • LED diode spacing can be 6,2 mm .
  • Possibility of improving panel information abilities by adding a stop information stand: I-POINT with touchscreen control and a voice interface for direct passenger – dispatcher communication.
  • Possibility of reserving the last line for the JSVV.
  • Possibility of using independent windows for displaying texts and graphics.
  • Low input power solution – these panels are equipped with LED diode voltage regulators (diodes do not overheat thus prolonging their lifespan).
  • Controlled ventilation depending on inner panel temperature.